dmesg - AMD Opteron 250
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 13 09:01:47 CEST 2013
Command line: initrd=initramfs-linux.img quiet ip=:::::eth0:dhcp nfsroot=192.168.0.254:/srv/arch BOOT_IMAGE=vmlinuz-linux
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000099bff] usable
BIOS-e820: [mem 0x0000000000099c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000fbf6ffff] usable
BIOS-e820: [mem 0x00000000fbf70000-0x00000000fbf76fff] ACPI data
BIOS-e820: [mem 0x00000000fbf77000-0x00000000fbf7ffff] ACPI NVS
BIOS-e820: [mem 0x00000000fbf80000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec003ff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: Sun Microsystems Sun Fire V20z/Stinger, BIOS V1.34.4.2 08/24/2005
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0xfbf70 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CEFFF write-protect
CF000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF00000000 write-back
1 base 00FC000000 mask FFFC000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f7df0-0x000f7dff] mapped at [ffff8800000f7df0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000093000] 93000 size 24576
init_memory_mapping: [mem 0x00000000-0xfbf6ffff]
[mem 0x00000000-0xfbdfffff] page 2M
[mem 0xfbe00000-0xfbf6ffff] page 4k
kernel direct mapping tables up to 0xfbf6ffff @ [mem 0x1fffa000-0x1fffffff]
RAMDISK: [mem 0x7fd84000-0x7fffefff]
ACPI: RSDP 00000000000f7dc0 00024 (v02 PTLTD )
ACPI: XSDT 00000000fbf74bd4 0005C (v01 PTLTD ? XSDT 06040000 LTP 00000000)
ACPI: FACP 00000000fbf76c0c 000F4 (v03 SUN V20z 06040000 PTEC 000F4240)
ACPI: DSDT 00000000fbf74c30 01F68 (v01 Sun V20z 06040000 MSFT 0100000E)
ACPI: FACS 00000000fbf7ffc0 00040
ACPI: HPET 00000000fbf76d00 00038 (v01 Sun V20z 06040000 PTEC 00000000)
ACPI: APIC 00000000fbf76d38 00076 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: SPCR 00000000fbf76dae 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
ACPI: SSDT 00000000fbf76dfe 0009D (v01 SUN V20z 06040000 LTP 00000001)
ACPI: SSDT 00000000fbf76e9b 0009D (v01 SUN V20z 06040000 LTP 00000001)
ACPI: SRAT 00000000fbf76f38 000C8 (v01 SUN V20z 06040000 SUN 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 1 -> APIC 0x01 -> Node 1
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0x7fffffff]
SRAT: Node 1 PXM 1 [mem 0x80000000-0xfbffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x7fffffff] -> [mem 0x00000000-0x7fffffff]
Initmem setup node 0 [mem 0x00000000-0x7fffffff]
NODE_DATA [mem 0x7fd7f000-0x7fd83fff]
Initmem setup node 1 [mem 0x80000000-0xfbf6ffff]
NODE_DATA [mem 0xfbf6b000-0xfbf6ffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007dc00000-ffff88007fbfffff] on node 0
[ffffea0002000000-ffffea0003ffffff] PMD -> [ffff8800f9600000-ffff8800fb5fffff] on node 1
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x00098fff]
node 0: [mem 0x00100000-0x7fffffff]
node 1: [mem 0x80000000-0xfbf6ffff]
On node 0 totalpages: 524169
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3907 pages, LIFO batch:0
DMA32 zone: 8128 pages used for memmap
DMA32 zone: 512064 pages, LIFO batch:31
On node 1 totalpages: 507760
DMA32 zone: 7934 pages used for memmap
DMA32 zone: 499826 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfd000000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 17, address 0xfd000000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfd001000] gsi_base[28])
IOAPIC[2]: apic_id 4, version 17, address 0xfd001000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x102282a0 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 0000000000099000 - 000000000009a000
PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
e820: [mem 0xfc000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:2
PERCPU: Embedded 28 pages/cpu @ffff88007da00000 s85184 r8192 d21312 u2097152
pcpu-alloc: s85184 r8192 d21312 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0 [1] 1
Built 2 zonelists in Node order, mobility grouping on. Total pages: 1015797
Policy zone: DMA32
Kernel command line: initrd=initramfs-linux.img quiet ip=:::::eth0:dhcp nfsroot=192.168.0.254:/srv/arch BOOT_IMAGE=vmlinuz-linux
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Memory: 4047828k/4128192k available (4908k kernel code, 476k absent, 79888k reserved, 4024k data, 820k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=2
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
NR_IRQS:4352 nr_irqs:512 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Enabling automatic NUMA balancing. Configure with numa_balancing= or sysctl
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2389.982 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4781.12 BogoMIPS (lpj=7966606)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 00fbf80000
mce: CPU supports 5 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20121018
ftrace: allocating 19310 entries in 76 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: AMD Opteron(tm) Processor 250 (fam: 0f, model: 05, stepping: 0a)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 1, Processors #1 OK
Brought up 2 CPUs
smpboot: Total of 2 processors activated (9564.73 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xfbf77000-0xfbf7ffff] (36864 bytes)
RTC time: 21:12:15, date: 04/19/13
NET: Registered protocol family 16
node 0 link 1: io port [0, 2fff]
TOM: 00000000fc000000 aka 4032M
node 0 link 1: mmio [fd000000, fd0fffff]
node 0 link 1: mmio [fd100000, fe7fffff]
node 0 link 1: mmio [fe800000, feafffff]
node 0 link 1: mmio [fec00000, fed0ffff]
node 0 link 1: mmio [a0000, bffff]
bus: [bus 00-ff] on node 0 link 1
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xfc000000-0xfebfffff]
bus: 00 [mem 0xfec00000-0xfcffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0x7fff] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x8100-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
PCI: root bus 00: hardware-probed resources
pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0xfec00000-0xfcffffffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci 0000:00:06.0: [1022:7460] type 01 class 0x060400
pci 0000:00:07.0: [1022:7468] type 00 class 0x060100
pci 0000:00:07.1: [1022:7469] type 00 class 0x01018a
pci 0000:00:07.1: reg 20: [io 0x1000-0x100f]
pci 0000:00:07.3: [1022:746b] type 00 class 0x068000
pci 0000:00:0a.0: [1022:7450] type 01 class 0x060400
pci 0000:00:0a.1: [1022:7451] type 00 class 0x080010
pci 0000:00:0a.1: reg 10: [mem 0xfd000000-0xfd000fff 64bit]
pci 0000:00:0b.0: [1022:7450] type 01 class 0x060400
pci 0000:00:0b.1: [1022:7451] type 00 class 0x080010
pci 0000:00:0b.1: reg 10: [mem 0xfd001000-0xfd001fff 64bit]
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
pci 0000:01:00.0: [1022:7464] type 00 class 0x0c0310
pci 0000:01:00.0: reg 10: [mem 0xfd120000-0xfd120fff]
pci 0000:01:00.1: [1022:7464] type 00 class 0x0c0310
pci 0000:01:00.1: reg 10: [mem 0xfd121000-0xfd121fff]
pci 0000:01:05.0: [1023:9880] type 00 class 0x030000
pci 0000:01:05.0: reg 10: [mem 0xfe000000-0xfe7fffff]
pci 0000:01:05.0: reg 14: [mem 0xfd100000-0xfd11ffff]
pci 0000:01:05.0: reg 18: [mem 0xfd800000-0xfdffffff]
pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:06.0: PCI bridge to [bus 01]
pci 0000:00:06.0: bridge window [mem 0xfd100000-0xfe7fffff]
pci 0000:02:02.0: [14e4:1648] type 00 class 0x020000
pci 0000:02:02.0: reg 10: [mem 0xfe810000-0xfe81ffff 64bit]
pci 0000:02:02.0: reg 18: [mem 0xfe800000-0xfe80ffff 64bit]
pci 0000:02:02.0: PME# supported from D3hot D3cold
pci 0000:02:02.1: [14e4:1648] type 00 class 0x020000
pci 0000:02:02.1: reg 10: [mem 0xfe830000-0xfe83ffff 64bit]
pci 0000:02:02.1: reg 18: [mem 0xfe820000-0xfe82ffff 64bit]
pci 0000:02:02.1: PME# supported from D3hot D3cold
pci 0000:02:04.0: [1000:0030] type 00 class 0x010000
pci 0000:02:04.0: reg 10: [io 0x2000-0x20ff]
pci 0000:02:04.0: reg 14: [mem 0xfe850000-0xfe85ffff 64bit]
pci 0000:02:04.0: reg 1c: [mem 0xfe840000-0xfe84ffff 64bit]
pci 0000:02:04.0: reg 30: [mem 0x00000000-0x000fffff pref]
pci 0000:02:04.0: supports D1 D2
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:0b.0: PCI bridge to [bus 03]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.THOR._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.Z000._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.Z002._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 5 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
e820: reserve RAM buffer [mem 0xfbf70000-0xfbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 19
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:02:04.0 BAR 6 [mem 0x00000000-0x000fffff pref]
pnp 00:00: disabling [mem 0x000c0000-0x000c7fff] because it overlaps 0000:02:04.0 BAR 6 [mem 0x00000000-0x000fffff pref]
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xffc00000-0xfff7ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xfff80000-0xffffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: Plug and Play ACPI device, IDs NWS8001 (active)
pnp 00:03: Plug and Play ACPI device, IDs NWS0010 (active)
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x1100-0x117f] has been reserved
system 00:08: [io 0x1180-0x11ff] has been reserved
system 00:08: [io 0x0ca2-0x0ca3] has been reserved
system 00:08: [io 0x0b78-0x0b7b] has been reserved
system 00:08: [io 0x0190-0x0193] has been reserved
system 00:08: [io 0x0290-0x0291] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [dma 2]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0700 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:06.0: BAR 15: assigned [mem 0xfc000000-0xfc0fffff pref]
pci 0000:00:0a.0: BAR 15: assigned [mem 0xfc100000-0xfc1fffff pref]
pci 0000:01:05.0: BAR 6: assigned [mem 0xfc000000-0xfc00ffff pref]
pci 0000:00:06.0: PCI bridge to [bus 01]
pci 0000:00:06.0: bridge window [mem 0xfd100000-0xfe7fffff]
pci 0000:00:06.0: bridge window [mem 0xfc000000-0xfc0fffff pref]
pci 0000:02:04.0: BAR 6: assigned [mem 0xfc100000-0xfc1fffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:0a.0: bridge window [mem 0xfc100000-0xfc1fffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0xfc000000-0xfebfffff]
pci_bus 0000:00: resource 6 [mem 0xfec00000-0xfcffffffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 1 [mem 0xfd100000-0xfe7fffff]
pci_bus 0000:01: resource 2 [mem 0xfc000000-0xfc0fffff pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 [mem 0xfc100000-0xfc1fffff pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:07.3: boot interrupts on device [1022:746b] already disabled
pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 2540k freed
agpgart-amd64 0000:01:05.0: AGP bridge [1023/9880]
agpgart-amd64 0000:01:05.0: aperture size 4096 MB is not right, using settings from NB
agpgart-amd64 0000:01:05.0: aperture from AGP @ fd100000fe000000 size 32 MB
Aperture beyond 4GB. Ignoring.
pci 0000:00:18.3: no usable aperture found
pci 0000:00:18.3: consider rebooting with iommu=memaper=2 to get a good aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1366405935.799:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7910
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
ioapic: probe of 0000:00:0a.1 failed with error -22
ioapic: probe of 0000:00:0b.1 failed with error -22
GHES: HEST is not enabled!
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 9:810:247
rtc_cmos 00:05: setting system clock to 2013-04-19 21:12:16 UTC (1366405936)
Freeing unused kernel memory: 820k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1224k freed
Freeing unused kernel memory: 440k freed
systemd-udevd[46]: starting version 200
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.128 (December 03, 2012)
tg3 0000:02:02.0 eth0: Tigon3 [partno(BCM95704A6) rev 2003] (PCIX:66MHz:64-bit) MAC address 00:09:3d:12:e6:1b
tg3 0000:02:02.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:02.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:02.0 eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
tg3 0000:02:02.1 eth1: Tigon3 [partno(BCM95704A6) rev 2003] (PCIX:66MHz:64-bit) MAC address 00:09:3d:12:e6:1c
tg3 0000:02:02.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:02:02.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:02:02.1 eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:02.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:02.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
systemd[1]: systemd 201 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Network is Online.
systemd[1]: Reached target Network is Online.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting Device-mapper event daemon FIFOs.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Paths.
systemd[1]: Reached target Paths.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting /home...
systemd-udevd[96]: starting version 201
systemd[1]: Mounting /root...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Expecting device dev-sda2.device...
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Expecting device dev-sda1.device...
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Mounted POSIX Message Queue File System.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
ACPI: Sleep Button [SLPF]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pci 0000:00:07.3: AMD GPIO region 0x80b0 already in use!
shpchp 0000:00:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp 0000:00:0a.0: Cannot reserve MMIO region
shpchp 0000:00:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp 0000:00:0b.0: Cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Floppy drive(s): fd0 is 1.44M
MCE: In-kernel MCE decoding enabled.
SCSI subsystem initialized
AMD768 RNG detected
EDAC MC: Ver: 3.0.0
FDC 0 is a post-1991 82077
systemd-udevd[136]: renamed network interface eth1 to enp2s2f1
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
input: PC Speaker as /devices/platform/pcspkr/input/input3
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revE or earlier detected (node 0).
EDAC amd64: CS0: Registered Double data rate SDRAM
EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:18.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: K8 revE or earlier detected (node 1).
EDAC amd64: CS0: Registered Double data rate SDRAM
EDAC MC1: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:19.2
EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
usbcore: registered new device driver usb
ACPI: bus type scsi registered
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
microcode: AMD CPU family 0xf not supported
Fusion MPT SPI Host driver 3.04.20
mptbase: ioc0: Initiating bringup
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
libata version 3.00 loaded.
pata_amd 0000:00:07.1: version 0.4.1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:01:00.0: OHCI Host Controller
ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:01:00.0: irq 19, io mem 0xfd120000
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 15
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:01:00.1: OHCI Host Controller
ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:01:00.1: irq 19, io mem 0xfd121000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ata2.00: ATAPI: CD-224E, 1.9A, max UDMA/33
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM TEAC CD-224E 1.9A PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ioc0: LSI53C1030 C0: Capabilities={Initiator}
scsi2 : ioc0: LSI53C1030 C0, FwRev=01032920h, Ports=1, MaxQ=222, IRQ=27
scsi 2:0:1:0: Direct-Access FUJITSU MAT3073NC 0104 PQ: 0 ANSI: 3
scsi target2:0:1: Beginning Domain Validation
scsi target2:0:1: Ending Domain Validation
scsi target2:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)
sd 2:0:1:0: [sda] 143638992 512-byte logical blocks: (73.5 GB/68.4 GiB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: b3 00 00 08
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:1:0: [sda] Attached SCSI disk
Adding 5260284k swap on /dev/sda2. Priority:-1 extents:1 across:5260284k
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: ntpd.service failed to run 'start' task: Read-only file system
gsettings[267]: segfault at 10 ip 00002aaaab2bb853 sp 00007fff37ac4788 error 6 in libgio-2.0.so.0.3400.3[2aaaab213000+14c000]
gsettings[270]: segfault at 10 ip 00002aaaab2bb853 sp 00007fff159b7588 error 6 in libgio-2.0.so.0.3400.3[2aaaab213000+14c000]